| | |
|
| |
| | |
|
|
Armaspec Stealth Recoil Spring Big Bore
|
|
MSRP Price: $79.99
Our Price: $75.99
You Save: $4.00 (5 %)
We currently have 2 available.
Item Number: STKARM153BB
Manufacturer: Armaspec
Manufacturer Part No: ARM153-BB
* Whole number only
|
Drop-in
replacement for standard buffer and spring
Reduce
felt recoil
Keep
the buffer spring from rubbing against the inner wall of the buffer
tube
Buffer
mass is designed to stay under constant tension against the bolt
carrier
Rubber
O-ring on the head of the buffer mass prevents metal on metal contact
Made in the U.S.A.
SPECIFICATIONS:
Length:
7.18''
Weight: 5.7oz
Version: 1st addition w/ Black
weight for .458 Socom/ .450 Bushmaster/ . 50 Beowulf
Compatibility:
A15 w/ Carbine length buffer tube
Sku: 60893990548
Most
bolt carriers have a rear opening of over .60″, there are a couple
of bolt carriers in the market place that have a rear opening of
under .60″ and will not function with the SRS.
9mm Bolt Carriers
ONLY: For proper function of the SRS-9 in your 9mm rifle or pistol,
the extra weight on the back of the bolt carrier needs to be removed.
It is held in with a spring pin.
INSTALLATION
AND MAINTENANCE:
Before installing
the recoil spring, it is always a good idea to re-tighten the screws
using either using two 3/32 hex key and fully tightening both screws
at the same time or using one 3/32 hex key and using the hole in the
rod for leverage.
The screws should
be re-tightened every time maintenance is performed on the firearm.
The polymer bumper
goes towards the rear of the firearm and the weight mass with the
o-ring goes towards the bolt carrier.
The SRS can be
installed with our without the buffer retainer. Most people run the
SRS without the buffer retainer for ease of maintenance.
The
SRS™ comes with Red LOCTITE on the front metal stop and Blue
LOCTITE for the bottom bumper, when reassembling we recommend
reapplying LOCTITE.
|
Product Reviews
|
|
|