LUTH-AR MBA-3 Carbine Buttstock Body - Black

The Luth-AR Modular Buttstock Assembly (MBA) for AR style carbines is designed to replace the standard buttstock on your AR. The MBA-3 is designed to work with a 6-position Mil-Spec or Commercial buffer tube. The MBA-3 features a 3-Axis Buttplate with Length-of-Pull adjustment as well as height and lateral adjustments, and an adjustable cheek rise in a low-cost, lightweight, strong and high-quality design.

The MBA-3 requires a Carbine buffer tube, either Mil-Spec or Commercial. This stock works with both carbine Commercial and Mil-Spec tubes/assemblies.

The MBA-3 also features an anti-rattle set screw. The modular design of the MBA Buttstock allows you to configure your buttstock to your specific and personal needs. Includes a rail attachment for attaching a monopod. The MBA features multiple attachment points for a sling, including molded pockets that will accept Grovtec QD cups, sold separately.

Description

• Fully Adjustable Carbine Buttstock assembly to mount to a carbine rifle (6-positions mil-spec or commercial tube) – This is our carbine stock
• The MBA-3 requires a Carbine buffer tube, either Mil-Spec or Commercial. This stock works with both carbine Commercial and Mil-Spec tubes/assemblies.
• Additional 1″ height on cheek rest
• 3-axis Adjustable Butt Plate Assembly extends additional 1 1/16″ length of pull and includes the following movement:
  1. Horizontal for linear adjustment (i.e. length of pull)
  2. Vertical for a perfect butt plate fit into the curvature of the shoulder.
  3. Lateral adjustment for a ½ inch left or right cast
  4. This butt plate assembly is interchangeable with the original MBA-1 Buttstock
• Includes a Picatinny Rail on the bottom rear of the Stock Body to attach your choice of many accessories.
• Designed a flat bottom index set screw (10-24) to eliminate that constant rattle of carbine collapsible buttstock. This also allows you to secure the stock in your favorite position.
• The MBA-3 comes with a  medium soft rubber recoil pad, Duro 85.
• The Luth-AR MBA-3 weighs roughly half that of comparable stocks coming in at just 18.5 ounces.
• Fits all .223 and .308 AR carbine style rifles
• Super Strong Glass Filled Nylon
• Easy to replace and quick to install
• Uses 4 out of the 6 positions on a mil-spec or commercial tube
• If you require a butt stock that will utilize the first 2 holes of the buffer tube to fully collapse, you can remove the cheek rest from the MBA-3, or order an MBA-4, order an MBA-4 and a 3-axis buttplate or order an MBA-5 buttstock.
• 
  

• Ergonomic
• Adapts To Existing Commercial and Mil-Spec Buffer Tubes
• Certain after Market Commercial Buffer Tubes that exceed  1.172″ diameter, may not fit
• The MBA-3 and MBA-4 are available in Black or Flat Dark Earth
• The vertical struts for the MBA-3 are fixed, therefore the cheek piece is not reversible like the MBA-1 however the cheek piece itself is designed with a cheek pad for left-handed use
• Caution: the MBA-3 and MBA-4 Carbine buttstocks are not designed to be used with Large Bore Calibers such as .338 Lapua or .50 BMG applications. See our MBA-1 and MBA-2 Rifle buttstocks as alternatives.
• The MBA-3 Carbine buttstock is NOT interchangeable with A2 standard buffer tube. You will need to purchase a MBA-1 or MBA-2 Rifle buttstock to fit A2 tubes 

• .223 Mil-Spec Carbine Buffer Assembly
• .223 Commercial Carbine Buffer Assembly
• .308 Mil-Spec Carbine Buffer Assembly
• .308 Commercial Carbine Buffer Assembly

• Sling Swivels (Side or Rear) Sold Separately, see below. Also see Tech-Tip Videos
• Carbine Buffer tube
• Carbine Buffer Body
• Carbine Buffer Spring
• Latch Plate
• Lock Ring

• When used with the smaller diameter Mil-Spec tube you can adjust the set screw located on the left hand side using the included 3/32” Allen wrench. Turn clockwise to slowly tighten the set screw until it contacts the buffer tube. The Anti-rattle set screw is NOT designed to lock the position of the stock. Over tightening may damage the butt stock.
• When sliding the buttstock onto a 6-position buffer tube, the lock pin has a notch in the head of the lock pin that must line up with a tab on the stock body. Once the slot and tab are lined up, the pin can be fully retracted allowing the buttstock to slide onto the tube. The MBA-3 should slide easily without resistance. If there is any resistance, the lock pin is not fully retracted. 

Luth-AR Note on Savage Rifles:

Our MBA-3 is designed to fit standard Mil-Spec and Commercial Tubes. Some Savage tubes have been found to be oversized making our stock fit very tightly. Please note that you may need to simply purchase a standard carbine tube in order for this to pair correctly. Note: Customers have reported that the MBA-3 or MBA-4 fit the buffer tube that comes on the new model 110 BA Stealth. If you have the older model 110 BA you may have to simply change the buffer tube.

Specs:
Application: Carbine
Buttstock Weight: 19.2oz
Extended Length-of-Pull: 15 5/8''
Collapsed Length-of-Pull: 11 11/16''
Overall Extended Length: 8 ¾''
Overall Collapsed Length: 7 11/16''
Cheek Rise: 1'' Fully Extended