Real Avid Gun Tool Pro

A toolkit that fits in your hand.

Made for rifles and shotguns, Gun Tool Pro’s rock-solid frame features 30 hard-working tools. Two-inch long bits fit into the magnetic 1/4” driver and 1/4” wrench for extra torque. It features two files, a locking claw-point knife and a removable magnetic storage container for holding small screws and pins. It also features a universal choke wrench and tap hammer, all in a sleek design. Gun Tool Pro sets the standard for compact gun tools.

Two bit drivers and double-sided bits

Two bit drivers located at the front and on the side of the frame handle your precision adjustments and high torque jobs, respectively. Eight square-cut, hollow ground bits ride right onboard in a spring-loaded hatch.

• T15 Torx
• T20 Torx
• T10 Torx
• 3/32" Flat
• 3/16" Flat
• #2 Phillips

Allen drivers on extended shafts offer reach

Allen wrenches on 2.5" steel shafts allow you to reach deep into recesses to make precision adjustments on firearms, optics, and accessories.

All tools to disassemble, adjust, maintain

Onboard and at the ready are a tap hammer for stubborn pins, fine and ultra fine metal files for deburring and polishing, a universal choke wrench for all gauges 12 - .410, and a special scope turret tool.

Surgically sharp claw point blade

The claw-point pattern blade on a liner lock is 2.5 inches in length and scalpel sharp to handle all of your everyday cutting operations

Product overview

• Removable magnetic storage compartment
• Choke wrench fits 6 gauges .410 to 10
• Two metal files
• 14 firearm-specific Torx®, Allen®, Phillips® and flat drivers/bits
• 1/4” bit driver
• Lanyard loop
• 2.5” claw-point knife blade
• 1/4” bit wrench for extra torque
• Tap hammer
• Scope turret tool
• Pin punch