Vltor GB-2S .750 Gas Block, Steel w/ Set Screws - Black

Vltor GB-2S Gas Block, Black Steel Set Screw Type .750 Diameter Bore - Black

• With the various rail systems currently being offered for the AR15/M16/M4 weapon system, the Vltor Low-Profile Gas Block is small enough to fit inside most rail systems. These gas blocks are an excellent replacement for the archaic fixed sight tower gas block, which has been the standard since the early 1960's.
• The Vltor Low-Profile Gas Block covers one-inch of the barrel's surface and is made to the tightest tolerances. These gas blocks are in 17-4 PH Stainless Steel and available in matte black oxide finish (anti-reflection/glare) or blasted to give a matte gray finish (anti-reflection/glare).
• All current models are made to fit barrels that feature a .750 (standard) or .625 (Pencil) diameter barrel.Fits within most AR15/M16/M4 aftermarket/free-float handguard/rail systems. Made to fit either .625 or .750-inch diameter barrels. Manufactured to high-tolerances while keeping the weight at a minimum amount.

• Overall Length: 1.000-inch
• Weight:: 1.4 oz
• Width: .925-inch
• Bottom Thickness: .560-inch (measured from the centerline of the bore)

Installation and legal note: The installation of the Vltor Low-Profile Gas Block should only be performed by a qualified gunsmith and/or certified armorer.